# SoBotz > Parts for the best robot makers ## Posts - [[:en]From a Makerspace Workshop to a €25 Combat Robot[:]](https://sobotz.com/en/from-a-makerspace-workshop-to-a-e25-combat-robot/): Getting into combat robotics can get expensive pretty quickly. Even the smallest robots need motors, electronics, a radio, batteries, charger, a chassis and, of course, something to hit the other robot with. If you are just curious about the hobby, spending a few hundred euros on your first robot isn’t exactly an easy sell. A few years ago, we wanted to try something different. What if we could make a small combat robot that people could build themselves during a workshop, without needing to spend much money? That’s how this project started. It started in 2023 The first version was made […] - [[:en]Getting Started with the M60F Sensor[:]](https://sobotz.com/en/getting-started-with-the-m60f-sensor/): The M60F is a compact time-of-flight distance sensor designed for small robots where space is limited but reliable distance sensing is still important. It can work as a simple digital detector, a PWM distance sensor, or a configurable serial sensor, making it suitable for everything from Mini Sumo robots to custom automation projects. To make setup easier, we’ve built a browser-based configuration tool that lets you read live measurements and change the sensor’s settings without writing any code. Configuration tool: https://sobotz.com/M60F_Sensor_Tool.html Connecting the sensor The M60F uses a half-duplex UART interface, so the TX and RX pins of your USB-UART adapter […] ## Pages - [[:en]Coupon policy[:]](https://sobotz.com/en/coupon-policy/): This page explains where discount codes work on sobotz.com and where they do not. It applies to every code we issue, unless the code itself says otherwise. Where a code works Discount codes apply to parts sold at their normal price. Enter your code at the checkout, in the Add coupons box next to your order summary. The discount is shown before you pay. Where a code does not work Codes cannot be used on: Items that are already discounted. This covers anything showing a sale price, and anything already reduced by a quantity discount, where the price per piece drops […] - [[:en]Builds[:]](https://sobotz.com/en/blog/) - [[:en]Events map[:]](https://sobotz.com/en/events-map/) - [[:en]About us[:]](https://sobotz.com/en/about/): SoBotz is a one-person workshop in Šiauliai, Lithuania, making the robot parts I wished existed when I started competing. Tomas Sobutas — owner, maker and everything in between I am from Šiauliai, Lithuania’s fourth-largest city, and I study electronics engineering at Kaunas University of Technology. Electronics caught me as a kid, LEGO robotics followed around 2013, and I built my first mini sumo robot in 2016. Since then I have competed across Europe. The losses between 2017 and 2019 came from trying to innovate instead of copying the designs that already worked — these days I usually place. I wrote up […] - [[:en]Create an account[:]](https://sobotz.com/en/register/) - [[:en]Learn[:]](https://sobotz.com/en/learn/) - [[:en]How to program Malenki HV[:lt]Kaip programuoti Malenki HV[:]](https://sobotz.com/en/programing-malenki/): Updating Malenki HV software (programming) Even though MalenkiHV come preprogrammed with latest software from Mark, you might be interested in updating it. Here we will show you how to do it yourself. First of all, you need a UPDI programmer. A cheap and easy way to get one is to take an AVR MCU (atmega328p, so Arduino nano, uno and similar) and upload jtag2updi code. You can get the code here: https://github.com/ElTangas/jtag2updi When you download the repository, open the source folder where you will find the .ino code. Upload it to an Arduino Nano and that’s the first part done. Next, you […] - [[:en]3D printing[:]](https://sobotz.com/en/3d-printing/) - [Files](https://sobotz.com/en/files/) - [[:en]Categories[:lt]Categories[:]](https://sobotz.com/en/categories/): Country: Lithuania Latvia Poland Romania Sumo: Mega Sumo (3kg) Mega Sumo RC (3kg) Mini Sumo Micro Sumo Nano Sumo Humanoid Sumo Combat: Please check the exact weight in the event info UK Antweight (150 or 200g) Antweight (1lb or 500g) Beetleweight (3lb or 1500g) Lego: API Icon Lego Line Following API Icon Lego Mega Sumo (3kg) API Icon Lego Sumo API Icon Lego Tug Of War Autonomous: Line Following Line Following Turbo Line Following Enhanced Folkrace Micro Mouse (Maze) Others: Football Freestyle Dragrace - [[:en]Partners[:]](https://sobotz.com/en/partners/): [:en]Massa sed elementum tempus egestas sed sed risus. Risus at ultrices mi tempus imperdiet nulla malesuada pellentesque elit.[:] - [Refund and Returns Policy](https://sobotz.com/en/refund_returns-2/): Overview Damaged, lost items or items with defects If your items were lost in transit,  damaged in transit, or arrived with a defect that was caused by QC issue, please contact us via email with a detailed description of the issue. We’ll assess your case individually and work quickly to find a resolution. In all other cases, like combat robot damage we are unable to replace or refund your products due to the nature of DIY and also abuse in combat robots.  Incorrect or Missing Items Please contact us if you received fewer items than ordered, please email us with your […] - [Terms and conditions](https://sobotz.com/en/terms-and-conditions/): Last updated: Please read these Terms of Use (“Terms”, “Terms of Use”) carefully before using the website (the “Service”) operated by (“us”, “we”, or “our”). Your access to and use of the Service is conditioned on your acceptance of and compliance with these Terms. These Terms apply to all visitors, users and others who access or use the Service. By accessing or using the Service you agree to be bound by these Terms. If you disagree with any part of the terms then you may not access the Service. Accounts When you create an account with us, you must provide us […] - [Newsletter](https://sobotz.com/en/newsletter/): [newsletter] - [Privacy Policy](https://sobotz.com/en/privacy-policy/): Last updated: (“us”, “we”, or “our”) operates the website (the “Service”). This page informs you of our policies regarding the collection, use and disclosure of Personal Information when you use our Service. We will not use or share your information with anyone except as described in this Privacy Policy. We use your Personal Information for providing and improving the Service. By using the Service, you agree to the collection and use of information in accordance with this policy. Unless otherwise defined in this Privacy Policy, terms used in this Privacy Policy have the same meanings as in our Terms and Conditions, […] - [Left Sidebar](https://sobotz.com/en/left-sidebar/): Massa sed elementum tempus egestas sed sed risus. Risus at ultrices mi tempus imperdiet nulla malesuada pellentesque elit. - [Right Sidebar](https://sobotz.com/en/right-sidebar/) - [[:en]Contact Us[:]](https://sobotz.com/en/contact/): [:en]Velturpis nunc eget lorem dolor sedviverra ipsum malesuada fames ac turpis egestas maecenas pharetra amet facilisis magna etiam tempor.[:] - [My account](https://sobotz.com/en/my-account/) - [[:en]Checkout[:]](https://sobotz.com/en/checkout/) - [[:en]Cart[:]](https://sobotz.com/en/cart/) - [Shop](https://sobotz.com/en/shop/) - [[:en]Home[:]](https://sobotz.com/en/): Featured Gear These key components will take your robots to the next level Shop Now Powerful N20 Motors N20 Motors with never seen 3.1A stall current at 6V. Currently we offer 600 and 3000 rpm. Malenki-HV A go to choice for 150g antweigts when you want to save weight and an easy setup 10A TB6612FNG Do you want to get more power? Just drop in our M2x10A as a TB6612FNG replacement Kanzawa blade Probably the best mini sumo blades you can find! Also they are made in Japan! Upcoming events: Find more events Popular Products ## Products - [[:en]Mini Pro Brushed - Antweight planetary gearmotor[:]](https://sobotz.com/en/product/mini-pro-brushed-antweight-planetary-gearmotor/): [:en] Tired of bushings failing on your brushed drive motors? Tired of fiddling with super short M2 screws? This upgraded antweight drive motor has a custom tooled outer casing specifically to remove failure modes of the repeat mini brushed motors. Gone are the 3mm shafts bending. No longer will a bushing failing lock up your drive. Rest easily knowing that too long mounting screws won't kill your motor. [:] - [[:en]Repeat Rubber flex wheels (2 Pack), 32-38-44mm[:]](https://sobotz.com/en/product/repeat-rubber-flex-wheels/): [:en] Want the grip from custom cast rubber wheels without the hassle of casting wheels? These wheels are designed specifically for combat robots! They work in both direct and indirect drive configurations, both with or without a pulley! [:] - [[:en]AM32 Dual Brushless Drive ESC[:]](https://sobotz.com/en/product/am32-dual-brushless-drive-esc/): [:en] Looking for something to simplify the wiring of your robot? The Repeat AM32 Dual Brushless Drive ESC makes the insides of your bot neat and tidy while delivering high performance in a tiny package. Running the latest AM32 software, this ESC punches above its size. [:] - [[:en]AM32 Micro Drive ESC[:]](https://sobotz.com/en/product/am32-micro-drive-esc/): [:en] Looking for brushless escs but can't find anything small enough? The Micro AM32 esc is the smallest on the market at 12mm x 18mm! Take the size savings without sacrificing drive performance! Running AM32 firmware tuned for robot drivetrains these are great for 1lb or 3lb drive! [:] - [[:en]Catalyst Dual Brushless ESC with Integrated Radio[:]](https://sobotz.com/en/product/catalyst-dual-brushless-esc/): [:en]Tiny dual brushless ESC with an integrated 2.4 GHz AFHDS 2A receiver. Designed for compact antweight and beetleweight robots, with AM32 firmware, built-in mixing and two additional PWM outputs. Basically a small MalenkiHV, but for BLDC motors.[:] - [[:en]Pro Brushless 2006 - Beetleweight planetary gearmotor[:]](https://sobotz.com/en/product/pro-brushless-2006-beetleweight-planetary-gearmotor/): [:en] Does your beetleweight need more drive power? Not happy with any of the options on the market? Tired of trying to put your own shafts into a 2xxx motor to get all the torque??? Repeat Drive Pro is modeled after the drivetrain that drove Lynx to 3 world championship titles. Its a customized 24mm 27:1 gearbox with a 2006 motor built in. [:] - [[:en]2004 Direct Drive Motor[:]](https://sobotz.com/en/product/2004-direct-drive-motor/): [:en] Introducing the repeat robotics direct drive 2004, perfect for 150g fairy robot weapons. We've taken the technology from our antweight scale direct drive motor and brought it down to the fairyweight scale! [:] - [[:en]2207 Antweight Battle Ready Hubmotor[:]](https://sobotz.com/en/product/2207-antweight-hubmotor/): [:en] Have you been looking for the easiest weapon solution for your antweight robot? Tired of dealing with belt drive or TPU hubs? The repeat 2207 battle ready hubmotor is ready to power your robot to victory! This motor has been tested by top bots across the US and now you can benefit from the reliability and durability of a custom hubmotor for a fraction of the price! This hubmotor has been designed with versatility in mind, with mounting for vert, midcutter, and undercutter style robots! Grabcad link below updated with 15+ free blade designs! Stock update: Motors are back in stock! [:] - [[:en]Tangent Drive 1406 - Antweight drive motor[:]](https://sobotz.com/en/product/tangent-drive-1406-antweight-drive-motor/): [:en] Have you wanted to build a tangent drive robot? Normal drone motors make structure challenging because the shafts come out the side opposite the mount. Now with repeat tangent drive motors, the shaft comes out the side where the mounting is, making tangent drive easier than ever before! Pair with repeat drive axles to take all the complexity out of your super speed drivetrain! Use our Repeat AM32 dual brushless drive esc to get rid of the jitters and make your robot drive smoother than ever before! [:] - [[:en]Tangent Drive 2207 - Beetleweight drive motor[:]](https://sobotz.com/en/product/tangent-drive-2207-motor/): [:en] Have you wanted to build a tangent drive robot? Normal drone motors make structure challenging because the shafts come out the side opposite the mount. Now with repeat tangent drive motors, the shaft comes out the side where the mounting is, making tangent drive easier than ever before! Pair with repeat drive axles to take all the complexity out of your super speed drivetrain! Use our Repeat AM32 dual brushless drive esc to get rid of the jitters and make your robot drive smoother than ever before! [:] - [[:en]Compact Brushed - Beetleweight planetary gearmotor[:]](https://sobotz.com/en/product/compact-brushed-gearmotor/): [:en] Have you been looking for a super light and compact brushed drive solution? Weighing only 45g, Repeat Compact is the lightest Beetleweight grade brushed drive on the market! Save weight without sacrificing durability with a billet hardened steel output shaft! [:] - [[:en]Antweight Aluminum Hubmotor Beater Kit[:]](https://sobotz.com/en/product/antweight-aluminum-hubmotor-beater-kit/): [:en]Lightweight 7075-T6 aluminium beater bar designed for the Repeat 2207 hubmotor. With a symmetrical tooth design and 91 g weight, it provides a durable weapon option for 1 lb antweight combat robots. 91g weight Symmetric tooth style for even wear Durable 7075-T6 aluminum Designed to fit repeat 2207 hubmotor internals Comes in Raw aluminum, Red anodize, or Black anodized finish Includes 1x beater bar [:] - [[:en]Ant Spinner Pulley - 18T-3m-05[:]](https://sobotz.com/en/product/ant-spinner-pulley-18t/): [:en]Lightweight aluminium pulley for belt-driven antweight weapons. Designed for HTD3M and S3M belts up to 5 mm wide and compatible with 5 mm shaft outrunner motors.[:] - [[:en]Gold Screw Hub for custom wheels (2 pack)[:]](https://sobotz.com/en/product/gold-screw-hub/): [:en] Need a cheap way to attach custom wheels to your next bot without sacrificing performance? Repeat robotics Gold Screw Hub are designed to custom mount antweight and beetleweight bots wheels [:] - [[:en]Gold Clamp Hub for custom wheels (2 pack)[:]](https://sobotz.com/en/product/gold-clamp-hub/): [:en]Need a cheap way to attach custom wheels to your next bot? Repeat robotics Gold Clamp Hub are designed to custom mount antweight and beetleweight bots wheels! They utilize clamping force instead of set screws to keep your wheels and hubs more secure than ever before![:] - [[:en]Belt Drive 2812[:]](https://sobotz.com/en/product/belt-drive-2812/): [:en] Want more power without all the extra weight? This 2812 motor was designed specifically for 3lb belt drive weapon systems to be durable while lightweight! Featuring a 5mm flanged D shaft for mounting pulleys and 3X m3 holes on the top if you wish to drive around the can! The shaft collar has a T6 drive to make it easy to torque down! [:] - [[:en]Mini Brushless 1106 Mk4.1 - Antweight planetary gearmotor (1pcs)[:]](https://sobotz.com/en/product/mini-brushless-1106-gearmotor/): [:en]Does your antweight suffer from a lack of drive power? Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? I too have suffered from these problems. That's why I started developing the first off-the-shelf 16mm brushless gearmotors to be sold to combat robot builders. Repeat drive mini Mk4 is the upgraded version of my game-changing brushless gearmotors, featuring a custom wound 1106 brushless motor coupled to a two stage, 28.5:1, all metal, 16mm planetary gearbox. These motors will empower you to drive circles around your competition... literally. Not sold on these motor's power output? The reigning NHRL 3lb champion Repeater runs the mk3 version of these motors! Note: Price is for one motor[:] - [[:en]2812 Beetleweight Battle Ready Hubmotor[:]](https://sobotz.com/en/product/2812-beetleweight-hubmotor/): [:en] Have you been looking for an easy way to create a high power spinner on your next beetleweight? Want a mechanically robust hub motor that ties your frame rails together? Tired of worrying about belts and pulleys? The Repeat 2812 hub motor has been custom designed for the combat robotics community, with guidance from many award winning builders with 20+ years of combined hub motor experience. This motor has been tested by top bots across the US and now you can benefit from the reliability and durability of a custom hub motor for a fraction of the price! [:] - [[:en]Mini Brushed Mk2 - Antweight planetary gearmotor 4mm (1pcs)[:]](https://sobotz.com/en/product/mini-brushed-mk2-antweight-planetary-gearmotor-4mm-1pcs/): [:en] Have you stripped the gearboxes on your drive motors leaving your bot stranded in the arena? Scared of the cost and complexity of brushless drive? I have the solution you've been waiting for. Enter Repeat Drive Brushed Mk2. More powerful motors that run cooler and give you even more performance. Ships with a 4mm shaft. [:] - [[:en]Repeat Screw Switch[:]](https://sobotz.com/en/product/repeat-screw-switch/): [:en] The Repeat Screw Switch is an ultralight power switch purpose-built for Antweight combat robots. Weighing just 1.5g, it features an impact-resistant body, PCB tabs for easy soldering, and T10 Torx driver actuation. [:] - [[:en]Battle Ready Lifter Servo - 40kg[:]](https://sobotz.com/en/product/battle-ready-servo/): [:en]A high-torque 270° standard-size servo designed specifically for combat robots. With 40 kg·cm of torque at 7.4 V, reinforced steel gears and built-in stall protection, it is well suited for lifters and other demanding mechanisms.[:] - [[:en]Dominion Dual Brushed Drive ESC[:]](https://sobotz.com/en/product/dominion-dual-brushed-drive-esc/): [:en] Size: 21.2 x 21.2 x 2.5 mm Weight: 9g with full length 16awg power and 24awg signal wires Input voltage : 2-4S LiHV BEC: 5V 500mA Channels: 2x brushed Active current Limiting: Set 6.25A per channel Mixing: yes (comes with mixing disabled) Includes power/status LED If the esc gives a single blink 5 seconds after powering on, you need to calibrate the esc to your radio system. Take a look at the user guide here: tinyurl.com/mpjabjer[:] - [[:en]Vortex 80A ESC by Repeat Robotics[:]](https://sobotz.com/en/product/vortex-80a-esc-by-repeat-robotics/): [:en]Have you been looking for a weapon ESC to keep up with the most demanding weapons out there? What about a drive ESC for your bigger bots (12lb or 30lb)? Want a bigger bot esc that comes with a BEC to power your receiver? We've got an esc that does all of these things without breaking the bank! Used in Ammonoid on drive during its 2025 motorama win. Also tested up to 8S on various beetles including Unga Bunga, Teeny Hex, Big G, and various others.[:] - [[:en]Antweight Hardox Forks[:]](https://sobotz.com/en/product/antweight-hardox-forks/): [:en]Competition-ready forks for antweight combat robots, made from 3 mm Hardox 450 and 4 mm Hardox 500TuF. Available in long Spear and shorter Fang designs for different front-end setups. Sold as pair, weight of longer forks is 9g/fork, shorter - 5g/fork.[:] - [[:en]Antweight Hardox 450-500tuf-600 Weapon Blades[:]](https://sobotz.com/en/product/antweight-hardox-blades/): [:en]High-strength weapon blades for antweight combat robots, made from 3 mm Hardox 450, 4 mm 500 TUF, or 6 mm Hardox 600 steel. Available in several designs for vertical spinners, horizontal spinners and drumlets. This is the first batch, it also water cut. You can notice, that the middle hole has these edges - the idea behind this was for these blades to be compatible with 3 types of motors, but due to close tolerances and specifics of water cutting this idea didn't work out. But this doesn't affect the performance of these blades.[:] - [[:en]Bot4Less ESP32 Robot Antweight Controller[:]](https://sobotz.com/en/product/bot4less-esp32-robot-antweight-controller/): [:en]A compact ESP32-based controller designed for small combat and hobby robots. It can drive two brushed motors, control a simple brushed weapon, and includes a servo output, battery monitoring and RGB LED support. Features Designed for 2S LiPo operation (8.4 V maximum) 3× brushed motor outputs Up to 1.8 A peak per motor channel 2× drive motor channels + 1× weapon motor channel Battery voltage monitoring Up to 4× addressable RGB LEDs Bluetooth control support Compact design for small robots [:] - [[:en]Antweight robot wheels - 34mm / 45mm[:]](https://sobotz.com/en/product/wheels-34mm-45mm/): [:en]Simple and reliable robot wheels available in 34 mm and 45 mm sizes. These are very common wheels for small DIY and educational robots, making them a good choice for beginners and first robot builds.[:] - [[:en]2S LiPo Type-C Charging Module[:]](https://sobotz.com/en/product/charging-module/): [:en]Compact DIY charging module for LiPo batteries. Designed for integration into custom electronics projects where a dedicated charging solution is required. This is a DIY module, not a complete consumer charger. The module does not provide cell balancing, so it must only be used with a LiPo battery pack whose cells are properly balanced.[:] - [[:en]MG90S Metal Gear Micro Servo[:]](https://sobotz.com/en/product/mg90/): [:en]The MG90S is a compact metal-gear micro servo offering approximately 180° of rotation, up to 2.2 kgf*cm of torque and fast response in a small 13.4 g package. A great choice for small robots, RC models, mechanisms and DIY projects. Weight: approximately 13.4 g Dimensions: approximately 22.5 × 12 × 35.5 mm [:] - [[:en]ESP-Flasher by Makerspace.lt[:]](https://sobotz.com/en/product/esp-flasher/): [:en]The ESP-Flasher is a modular programmer and debugging tool for ESP WiFi modules, including ESP-12F and ESP-01. It lets you flash and debug modules directly on your PCB without soldering, using spring-loaded pogo pins and magnetic attachment for hands-free development. It features USB-C, an integrated UART-to-USB converter, automatic programming/reset control, 3.3 V regulation and exposed pins for probing with test equipment. The ESP-12F version can be used directly with modules already soldered onto a PCB. The durable SLA 3D-printed enclosure protects the electronics and provides clearly labeled pins for easier development.[:] - [[:en]Dallas DS18B20 temperature sensor with 2.5mm audio jack[:]](https://sobotz.com/en/product/dallas-ds18b20-temperature-sensor-with-2-5mm-audio-jack/): [:en]Dallas DS18B20 temperature sensor with a 2.5 mm 4-pole audio jack connector. Designed for easy connection to compatible temperature monitoring instruments and supports reliable 1-Wire temperature measurement. The sensor features a stainless-steel waterproof probe and is suitable for a wide range of temperature monitoring applications.[:] - [[:en]Temp-1w8-pro: thermometer with up 8 sensors[:]](https://sobotz.com/en/product/temp-1w8-pro/): [:en]A compact temperature monitoring instrument capable of measuring up to 8 DS18B20 1-Wire temperature sensors simultaneously. It features a 128×64 OLED display, two programmable buttons, USB-C power and automatic sensor recovery in case of invalid readings. The device comes pre-flashed with ESPHome and is ready to integrate with Home Assistant without additional configuration. Temperature sensors are not included by default and can be purchased separately.[:] - [[:en]Airsoft Bomb Prop KMS-ANT v2.0[:]](https://sobotz.com/en/product/kms-ant-v2-0/): [:en]KMS-ANT v2.0 is a professionally made airsoft and paintball bomb prop designed to add more action to games and scenarios. It features multiple game modes including Defusal, Domination, Zone Control, Timer and Respawn Timer. The prop has a rugged IP55-rated PP case, configurable 90–110 dB siren, intuitive controls and support for firmware updates over WiFi. Future firmware updates will also enable game modes using multiple props with wireless communication. The KMS-ANT is powered by a standard airsoft AEG battery with a Deans connector and provides around 20 hours of operation with a 1100 mAh 11.1 V LiPo battery. Battery not included. Dimensions: 23 × 19 × 11 cm Weight: approximately 1.3 kg without battery[:] - [[:en]3D printed part[:]](https://sobotz.com/en/product/3d-printed-part/): Custom printing, priced from your uploaded model. - [[:en]ST4RT SoBotz Sumo Start Module[:]](https://sobotz.com/en/product/st4rt-sobotz-sumo-start-module/): [:en]The smallest start-stop module for sumo, built as a drop-in for the official p1r.se start module — same pinout, so it fits any robot already wired for one. [10.2 x 10.2 x 6mm] size 2.8–5.2V operating voltage range Same K / S / – / + pinout as p1r.se - direct swap Extra, separate IR pin breaks out the raw receiver signal, so you can read the referee remote without a second IR receiver State survives a power reset — if the module was already started when power drops, it comes back started instead of stalling your match Works at RoboChallenge Romania and most other sumo events (not JSumo based start) [:] - [[:en]SoBotz N10 DC Motor – 6V, 600 RPM[:]](https://sobotz.com/en/product/sbtz_n10_600/): [:en]This high-performance motor from SoBotz delivers 600 RPM and 0.4kg/cm stall torque at 6V, with a stall current of up to 0.6A. Designed for durability, it features a strong gearbox with steel plates, carbon brushes, and light screw glue for secure assembly, making it perfect for smaller robotics and combat scenarios. Is on par or better with competitors in power and reliability.[:] - [[:en]SoBotz N20 DC Motor – 6V, 1000 RPM[:]](https://sobotz.com/en/product/sbtz_n20_600-2/): [:en]This high-performance motor from SoBotz delivers 600 RPM and 1kg/cm stall torque at 6V, with a stall current of up to 2.8A. Designed for durability, it features a strong gearbox with steel plates, carbon brushes, and light screw glue for secure assembly, making it perfect for robotics and combat scenarios. Is on par or better with competitors in power and reliability.[:] - [[:en]M60F Mini Sumo Sensor[:]](https://sobotz.com/en/product/m60f/): [:en]After a lot of work we introduce the M60F - worlds smallest Mini Sumo Sensor in the market! 7x7x9mm size 5-600mm distance (configurable) This sensor is highly configurable with settings like these: Output type: Digital (on/off), PWM, Addressable OneWire Serial (HalfDuplex) Max and min sensing distances Calibration of distance sensing Adjustable timing budget Github for library and other info: https://github.com/Mindaugas1207/TOF-Distance-sensor Config tool: M60F online config tool We offer bulk deals, please check below (discount applied in the cart)[:] - [[:en]FS2A Receiver FlySky AFHDS 2A[:]](https://sobotz.com/en/product/fs2a-receiver-flysky-afhds-2a/): [:en]FS2A Receiver– reliable 2.4 GHz control with antenna, heatshrink, and 2.54 mm right-angle connectors included. 2.4 GHz frequency, AFHDS 2A protocol, compatible with FlySky, FlSky and other AFHDS 2A based transmitters 4 channel PWM output 2g weight without connectors or heatshrink Operating voltage: 3.3 –10 V [:] - [[:en]Scarab Antweight Robot Brushed 2x10A ESC[:]](https://sobotz.com/en/product/scarab/): [:en] Input voltage: 7.4V – 18V (2S – 4S LiPo) Lightweight – 40 x 25 x 3.4mm, 4g 10A brushed ESC – 2 drive channels (mixing & braking) Built-in AFHDS 2A receiver (FlySky, FlSky, Turnigy) – saves space & weight Easier soldering – Quality ENIG (gold) finish 2 PWM outputs – for servos or brushless ESCs Driving invert mode – flip direction with a switch when upside down Telemetry – sends battery voltage to transmitter Servo stretcher mode – extends servo range (new addition) [:] - [[:en]Mini Sumo Blade - 10 pcs[:]](https://sobotz.com/en/product/cheap-mini-sumo-blade/): [:en]A cheap option of mini sumo blades Even though these blades aren't expensive, they still perform almost as well as the ShadowEdge Kanzawa blades so you can use them for training, simple competitions or when you are on a budget. Price is for 10 blades in total with carry box Dimensions of blade: 99.8x13.7x0.45mm Weight: 4.9g[:] - [[:en]M2X10A Motor Driver 10A TB6612FNG[:]](https://sobotz.com/en/product/m2x10a/): [:en]The M2X10A is a high-performance dual-channel motor driver designed as a replacement and upgrade for the TB6612FNG. With support for 6V-30V input and up to 13A continuous current per channel, it delivers powerful and efficient motor control. Featuring PWM and direction inputs, inversion control, and slow decay braking, it is ideal for robotics and high-power applications. Size: 21.2mm x 21.2mm Weight: 2.1g Includes: 1pcs M2X10A Motor Driver Pinout same as TB6612FNG, drop-in replacement[:] - [[:en]PCB Screw Switch[:lt]PCB Screw Switch[:]](https://sobotz.com/en/product/pcb-screw-switch/): [:en]A high-power PCB switch designed for demanding applications. Featuring an M5 screw connection (available in slim and normal versions) with a pre-soldered nut, it can handle more current than XT60 connectors. Ideal for high-amperage setups—just be mindful of heat buildup at extreme loads. Includes: 1pcs PCB with presoldered nut + 1pcs screw (slim or standard) Weight: 1.25g PCB + Screw (standard 1.5g, slim 1.15g) Dimensions: 20 x 13 mm (screw thread height 5mm)[:lt]A high-power PCB switch designed for demanding applications. Featuring an M5 screw connection (available in slim and normal versions) with a pre-soldered nut, it can handle more current than XT60 connectors. Ideal for high-amperage setups—just be mindful of heat buildup at extreme loads. Includes: 1pcs PCB with presoldered nut + 1pcs screw (slim or standard)[:] - [[:en]Malenki-HV Antweight Robot Brushed ESC[:lt]Malenki HV &amp;amp;amp;amp;quot;Antweight&amp;amp;amp;amp;quot; Robotų valdiklis[:]](https://sobotz.com/en/product/malenki-hv/): [:en] Input voltage: 7.4V - 18V (2S - 4S LiPo) Lightweight – 32.1 x 19 x 3.2mm, 2.3g 3.7A brushed ESC – 2 drive channels (mixing & braking), 1 weapon channel Built-in AFHDS 2A receiver (FlySky, FlSky, Turnigy) – saves space & weight Easier soldering - Quality ENIG (gold) finish and bigger pads with holes 2 PWM outputs – for servos or brushless ESCs Driving invert mode – flip direction with a switch when upside down Telemetry – sends battery voltage to transmitter Servo stretcher mode – extends servo range (new addition) [:lt]&lt;ul&gt; &lt;li&gt;&lt;strong data-start=&quot;601&quot; data-end=&quot;619&quot;&gt;Įėjimo įtampa:&lt;/strong&gt; 7.4V - 18V (2S - 4S LiPo baterija)&lt;/li&gt; &lt;li&gt;&lt;strong data-start=&quot;2&quot; data-end=&quot;27&quot; data-is-only-node=&quot;&quot;&gt;Lengvas bei mažas&lt;/strong&gt; – 32.1 x 19 x 3.2mm, 2.3g&lt;/li&gt; &lt;li&gt;&lt;strong&gt;Lengvas litavimas&lt;/strong&gt; - kokybiškas ENIG (aukso) padengimas ir didesni takeliai laidų prijungimui&lt;/li&gt; &lt;li&gt;&lt;strong data-start=&quot;52&quot; data-end=&quot;70&quot; data-is-only-node=&quot;&quot;&gt;3.7A šepetėlinis ESC&lt;/strong&gt; – 2 važiavimo kanalai (su &quot;mixing&quot; ir stabdymų), 1 šepetėlinis ginklo kanalas&lt;/li&gt; &lt;li&gt;&lt;strong data-start=&quot;131&quot; data-end=&quot;161&quot; data-is-only-node=&quot;&quot;&gt;Integruotas AFHDS 2A imtuvas&lt;/strong&gt; (FlySky, FlSky, Turnigy) – sutaupo vietos ir svorio&lt;/li&gt; &lt;li data-start=&quot;196&quot; data-end=&quot;248&quot;&gt;&lt;strong data-start=&quot;198&quot; data-end=&quot;215&quot; data-is-only-node=&quot;&quot;&gt;2 &lt;/strong&gt;&lt;strong data-start=&quot;198&quot; data-end=&quot;215&quot; data-is-only-node=&quot;&quot;&gt;PWM išėjimai&lt;/strong&gt; – servo varikliams ar bešepetėliniams (BLDC) varikliams&lt;/li&gt; &lt;li&gt;&lt;strong data-start=&quot;963&quot; data-end=&quot;986&quot;&gt;Invertuoto važiavimo režimas - &lt;/strong&gt;leidžia greitai apkeisti važiavimo kryptis apsivertus robotui&lt;/li&gt; &lt;li data-start=&quot;325&quot; data-end=&quot;381&quot;&gt;&lt;strong data-start=&quot;327&quot; data-end=&quot;340&quot; data-is-only-node=&quot;&quot;&gt;Telemetrija&lt;/strong&gt; –siunčia baterijos įtampos informaciją atgal į siųstuvą&lt;/li&gt; &lt;li&gt;&lt;strong&gt;Servo variklių &quot;prailginimas&quot; - &lt;/strong&gt;prailgina servo judėjimo kampą&lt;/li&gt; &lt;/ul&gt;[:] - [[:en]Mini Sumo Kanzawa ShadowEdge Black Blade[:lt]Mini Sumo Black Kanzawa Blade ShadowEdge[:]](https://sobotz.com/en/product/mini-sumo-kanzawa-shadowedge-black-robot-blade/): [:en] Designed for mini sumo robots to get underneath opponents with precision. Made from hardened stainless steel for durability and featuring a black finish to avoid detection by sensors. Perfect for competitive edge in high-stakes matches. Price for 1 blade. [:lt] Designed for mini sumo robots to get underneath opponents with precision. Made from hardened stainless steel for durability and featuring a black finish to avoid detection by sensors. Perfect for competitive edge in high-stakes matches. Price for 1 blade. [:] - [[:en]Minduino M25A Brushed ESC[:]](https://sobotz.com/en/product/m25a_esc/): [:en]We developed a powerful and small brushed ESC for robots with MCUs. This ESC features current feedback, current limiting, small size and is able to handle peaks up to 168A (for <10us).[:] - [[:en]SoBotz PWR 600RPM Motor[:]](https://sobotz.com/en/product/sobotz-pwr-600rpm-motor/): [:en]This high-performance motor from SoBotz delivers 600 RPM and 2.2 kg/cm stall torque at 6V, with a stall current of up to 4.1A. Designed for durability, it features a strong gearbox with steel plates, carbon brushes, and light screw glue for secure assembly. These motors are perfect for sumo, mini sumo robots and combat robots up to 1kg Restock in end of October[:] - [[:en]SoBotz N20 Breakout PCB Pair[:]](https://sobotz.com/en/product/n20breakout/): [:en]These PCBs have a simple purpose - to make it easier to solder to the motors and adding rigidity to the metal contacts so they don't break! You can use these PCBs directly with wires soldered onto the PCB or you can add a 2.54mm connector for easy changes during competitions. Package includes: A pair of breakout PCBs (2pcs) Color can differ from the photo. (we currently have blue PCBs) Weight:  ~0,175g (1pcs)[:] - [[:en]SoBotz N20 DC Motor – 6V, 3000 RPM[:]](https://sobotz.com/en/product/sbtz_n20_3000/): [:en]This high-performance motor from SoBotz delivers 3000 RPM and 0.5 kg/cm stall torque at 6V, with a stall current of up to 3A. Designed for durability, it features a strong gearbox with steel plates, carbon brushes, and light screw glue for secure assembly. These motors are perfect for line following robots. They are on par or better than competitors in power and reliability.[:] - [[:en]SoBotz N20 DC Motor – 6V, 600 RPM[:]](https://sobotz.com/en/product/sbtz_n20_600/): [:en]This high-performance motor from SoBotz delivers 600 RPM and 1.3 kg/cm stall torque at 6V, with a stall current of up to 2.7A. Designed for durability, it features a strong gearbox with steel plates, carbon brushes, and light screw glue for secure assembly, making it perfect for robotics and combat scenarios. Is on par or better with competitors in power and reliability.[:] ## Optional - [Agent (MCP protocol)](websites-agents.hostinger.com/sobotz.com/mcp) [comment]: # (Generated by Hostinger Tools Plugin)