Battle Ready Lifter Servo – 40kg

Description

The Repeat 40kg Battle Servo is a standard-size servo designed specifically for combat robot applications.

It provides 40 kg·cm of stall torque at 7.4 V with 270° of travel, making it suitable for lifters and other mechanisms where high torque and a wide range of motion are needed.

The servo uses upgraded steel gears, a larger gear train and a pinion gear spot-welded to the shaft. It also includes stall current limiting and stall protection to help protect the servo when the mechanism is blocked.

The cable has been shortened to 5 cm to reduce unnecessary wire inside the robot, and an upgraded aluminium servo horn is included.

Specifications

• Torque: 40 kg·cm @ 7.4 V
• Speed: 0.16 s / 60° @ 7.4 V
• Travel: 270°
• Control signal: 1000–2000 µs
• Weight: 62.5 g without horn / 66 g with aluminium horn
• Size: Standard-size servo, approximately 56.2 × 44.5 × 20 mm maximum
• Gears: Steel
• Stall protection: Yes
• Stall current limiting: Yes
• Servo horn: Aluminium, included
• Wire length: 5 cm
• Recommended use: 1 lb and 3 lb combat robots

The servo is particularly well suited for 1 lb and 3 lb control bots and lifters. For higher-voltage robot systems, a suitable servo BEC should be used.